Do you have room that might use a ceiling fan Adding a ceiling fan on your own is relatively easy, if you are merely replacing a light fixture that is already in the correct location. Virtually all of the wires you need is already there so the only thing is to change the present workbox with one that is designed for the weight of a ceiling fan. If you dont modify the current workbox to something that can cope with the weight could spell disaster. woodworking plans Before you start your project, read the instructions for the fan you have selected, and make certain that you have all of the essential tools.

If you're going to install the fan over a cathedral type ceiling, you might want to get parts to boost the fan lower. Whenever you are ready to set up the fan, ensure that the circuit breaker is turned off so you wont get electrocuted. When you eliminate the light fixture, check to see if the current workbox can cope with the increased weight. Normally they aren't made for a ceiling fan, so you will need to include further support. You can do this really easily if you are able to access the light fixture from the attic.

To add new support, you merely nail a 2x4 between the ceiling rafters in order that it touches the top of the workbox. Make sure that the 2x4 is anchored and then attach on the box to the wood. If everything is done correctly, the excess weight of the fan will now be totally supported by the wood and the screws. If you never have admittance to the attic, you will definately have to deploy metal cross bracing via the hole in your ceiling. This is more difficult to do, and probably not as safe in the end, but definitely will have to do with no attic access.

At this point, after setting up the fan as stated by the instructions, you are prepared to put any fan. The hard part is holding the fan, while joining the wiring. It depends on the type of fan you have, many come with a bracket with a J hook while others have a hanging frame. Majority of fans employ a chain to control the speed of the fan when the wall switch turns the product on or off. If you prefer a light kit along with your fan, they can be controlled by either chain or wall switch.

The next task is to go by the wiring instructions which are as simple as joining two white wires, two black wires and two ground wires. Once you have accomplished assembling the fan and wiring, the last step is to install the fan blades. When that is completed, turn the breaker back on to see the results.