Do you have room that could utilize a ceiling fan Its not really complicated to install a ceiling fan by yourself if you are considering to replace a light fixture. All of the wiring will already be there, so the only challenge will be replacing the existing workbox with one that is authorized for the weight of a ceiling fan. It could be very dangerous if you do not swap your current workbox to something that can handle the extra weight of the ceiling fan. Just before you perform anything, read the instructions for your fan very carefully and make certain you have the necessary tools beginner woodworking.

When you are hanging the fan over a cathedral ceiling, you may need to obtain additional parts for extending the fan down lower. Once you are prepared for the real installation, make sure that the breaker is switched off, so no power is going to the light you are swapping. When you take out the light fixture, examine to see if the pre-existing workbox can handle the increased weight. Generally they aren't designed for a ceiling fan, so you will have to add more additional support. Incorporating support to the workbox is not that hard if you have admittance to the light fixture from the attic.

To increase support, you simply nail a 2x4 between the ceiling rafters so it touches the top of the workbox. Make sure the 2x4 is attached in its place, and then attach the box to the wood. If you did it accurately, the excess weight of the fan should be well supported by the 2x4 wood and screws. If you dont get entry to the attic, you will ought to place a cross bracing in your ceiling. good woodworking ideas Doing this is far more of a challenge and may not be as reliable as using a 2x4 but it is the most suitable you can do if you dont have access to the attic.

At this point, after setting up the fan according to the instructions, you are ready to put your new fan. The challenging part is hooking up the wiring while retaining the fan. It depends upon the kind of fan you have, many come with a bracket with a J hook while others have a holding frame. Majority of fans have a chain to master the speed of the fan while the wall switch turns the product on or off woodworking plans. If you choose to also mount a light kit with the fan, both can be operated by either chain or wall switch.

The next task is to follow the wiring details which are as basic as joining two white wires, two black wires and two ground wires. Now all you want to do is accomplish assembling the fan according to the instructions, by attaching the fan blades. Once that is carried out, turn the breaker back on to see the results.